Debugger Commands - Motorola MVME2100 Installation And Use Manual

Hide thumbs Also See for MVME2100:

Table of Contents

PPCBug Firmware

Debugger Commands

4-6

For example, if a breakpoint has been specified, then control returns to the

debugger when the breakpoint is encountered during execution of the user

program. Alternately, the user program could return to the debugger by

means of the System Call Handler routine RETURN (described in the

PPCBug Firmware Package User's Manual, listed in Appendix A,

Documentation). For more about this, refer to the GD, GO, and GT

command descriptions in the PPCBug Firmware Package User's Manual,

listed in Appendix A,

A debugger command is made up of the following parts:

The command name, either uppercase or lowercase (e.g., MD or

md).

Any required arguments, as specified by command.

At least one space before the first argument. Precede all other

arguments with either a space or comma.

One or more options. Precede an option or a string of options with

a semicolon (;). If no option is entered, the command's default

option conditions are used.

The individual debugger commands are listed in the following table. The

commands are described in detail in the PPCBug Firmware Package

User's Manual, listed in Appendix A,

Documentation.

Table of Contents