Motorola MVME2100 Installation And Use Manual page 76

Modifying the Environment
5
5-6
Primary SCSI Data Bus Width [W/N] = N?
W
N
Secondary SCSI identifier = 07?
Select the identifier. (Default = 07.)
NVRAM Bootlist (GEV.fw-boot-path) Boot Enable [Y/N] = N?
Y
N
Note
When enabled, the GEV (Global Environment Variable) boot
takes priority over all other boots, including Autoboot and
Network Boot.
NVRAM Bootlist (GEV.fw-boot-path) Boot at power-up only [Y/N] = N?
Y
N
NVRAM Bootlist (GEV.fw-boot-path) Boot Abort Delay = 5?
The time (in seconds) that a boot from the NVRAM boot list will delay
before starting the boot. The purpose for the delay is to allow you the
option of stopping the boot by use of the
is from 0 - 255 seconds. (Default = 5 seconds)
Auto Boot Enable [Y/N]
Y
N
Wide SCSI (16-bit bus).
Narrow SCSI (8-bit bus). (Default)
Give boot priority to devices defined in the fw-boot-
path global environment variable (GEV).
Do not give boot priority to devices listed in the fw-
boot-path GEV. (Default)
Give boot priority to devices defined in the fw-boot-
path GEV at power-up reset only.
Give power-up boot priority to devices listed in the
fw-boot-path GEV at any reset. (Default)
BREAK
= N?
The Autoboot function is enabled.
The Autoboot function is disabled. (Default)
Computer Group Literature Center Web Site
key. The time value