Table 14 Navigation Commands - Motorola PPC/CPCI-690 Reference Manual

Command Set
m
D
ESCRIPTION
S
YNTAX
P
ARAMETERS
4 - 22
This command provides an editor with which you can display and modify
the memory contents of an address. Three tasks can be carried out:
• Displaying and modifying the memory contents of an address
• Specifying the memory access size and displaying and modifying the
memory contents of an address
• Specifying the memory access size and type and displaying and modi-
fying the memory contents of an address
To navigate between the addresses, a key and different commands can be
entered. They do not change the access option in the command line. The
following key and commands are supported:
Table 14: Navigation Commands
Key/Command
<Ctrl+Enter>
=
-
-<count>
+
+<count>
#address
.
m <address> [<size>] [<type>]
Note: Type options O and E override the options B, W, and L. Access op-
tions B, W, L, N, and E check whether the write access has been success-
ful by performing a read access after the write access. If the written and
the read data do not match, the command is terminated and an error mes-
sage displayed.
Description
Current address + 1
Same as current address
Current address – 1 x size
Current address – <count>
Current address + 1 x size
Current address + <count>
Address
Exit to the PowerBoot command line
PowerBoot
PPC/CPCI-690