Figure 1-2. Mvme2100 Installation And Removal From A Vmebus Chassis - Motorola MVME2100 Installation And Use Manual

2. Perform an operating system shutdown. Turn the AC or DC power
3. If the MVME2100 has already been installed in a VMEbus card slot,

Figure 1-2. MVME2100 Installation and Removal From a VMEbus Chassis

4. Remove the filler plate(s) from the front panel of the MVME2100.
http://www.motorola.com/computer/literature
off and remove the AC cord or DC power lines from the system.
Remove chassis or system cover(s) as necessary for access to the
VME modules.
carefully remove it as shown in the figure below and place it with
connectors P1 and P2 facing you.
If installing both PMC and PC•MIP(s), remove both filler plates.
Installing the MVME2100 Hardware
1
1-9