I/O Expansion Cards; Pci Mezzanine Card; Type Ii Pc-Mip - Motorola MVME2100 Installation And Use Manual

I/O Expansion Cards

Two openings are located on the front panel of the MVME2100 to provide
I/O expansion by allowing access to a PCI Mezzanine Card (PMC) or two
Type II PC•MIP cards. Refer to Appendix C,
for additional information on pin assignments.
Do not attempt to install any PMC boards without performing
!
an operating system shutdown and following the procedures
Warning given in the user's manual for the particular PMC.

PCI Mezzanine Card

The right-most (lower) opening labeled
MVME2100 front panel provides front panel I/O access to a PMC that is
connected to the 64-pin connectors J11, J12, and J14 on the MVME2100.
Connector J14 allows rear panel P2 I/O. Refer to Appendix C,
Pin Assignmentsfor additional information on pin assignments.

TYPE II PC-MIP

The left-most opening labeled
panel provides front panel I/O access to two Type II PC•MIP cards
connected to the 64-pin connectors P31/P32, and P41/P42 respectively on
the MVME2100. Refer to Appendix C,
additional information on pin assignments.
http://www.motorola.com/computer/literature
MVME2100 User Interface Devices
Connector Pin Assignments
PCI MEZZANINE CARD
on the MVME2100 front
TYPE II PC-MIP
Connector Pin Assignments
2
on the
Connector
for
2-7