Clear Audits; Clear Errors - Avaya Definity SI Maintenance Manual

Error Messages from Chapter 8: Maintenance
Commands
No Answer
Time-Out

clear audits

Help Messages
If the technician presses
appears:
Error Messages
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:

clear errors

Help Messages
If the system technician presses
message appears:
A-28 Issue 4 May 2002
Most off-the-shelf external modems provide a timer that abandons any
outbound data call after a predetermined interval. Some modems provide
for this timer to be disabled, thus allowing an outbound call to ring
indefinitely. AT&T Paradyne does not provide this capability with their
modem line, because it is generally undesirable to have an outbound call
attempt ring indefinitely.
The internal modem must have this parameter disabled or set to at least
255 seconds.
This is a non-administrable parameter. For the external modem
connection, this parameter will be the first initialization string to be
transmitted to the external modem. This field will be visible on the
administration form in display mode only.
This hardcoded constant can be overridden for type approval applications,
specifically in the U.K and other Western European nations, by the use of
the "Misc. Init. Param:" field. (S7=255)
after entering "clear audits" the following message
HELP
peak-hour
All maintenance resources busy; try again later
after entering "clear errors," the following
HELP
Entry is not required
cumulative
555-233-123