Pri-Cdr/Sec-Cdr (Pri-Cdr Link) - Avaya Definity SI Maintenance Manual

PRI-CDR/SEC-CDR (PRI-CDR Link)

PRI-CDR/SEC-CDR (PRI-CDR Link)
MO Name (in Alarm
Log)
PRI-CDR/SEC-CDR
PRI-CDR/SEC-CDR
The CDR feature records detailed call information on all incoming and outgoing
calls on specified trunk groups and sends this information to an CDR output
device. The two physical links can be administered for connecting external CDR
output devices to the system. They are identified as the primary CDR (PRI-CDR)
link and the secondary CDR (SEC-CDR) link. The CDR link can be administered
to a data extension or the EIA port on the system TN773 Processor circuit pack
which provides a standard EIA-232C interface. The external CDR output devices
are:
94A Local Storage Unit (LSU)
TELESEER CDR Unit
Call Accounting System (CAS)
Call Detail Recording Unit (CDRU)
Printer
Host computer
Personal computer (PC)
Customer-provided equipment
Refer to DEFINITY Enterprise Communications Server Administrator's Guide, for
details of the CDR feature.
CDR Link Maintenance provides a strategy for maintaining the link between the
system and an external CDR output device. The strategy includes a set of tests
for periodic diagnosis, detection of errors during normal operation, actions for
troubleshooting, and raising alarms for serious problems. CDR Link Maintenance
uses a try-and-wait mechanism for maintaining the CDR link. If the CDR link is
torn down due to an error, CDR Link Maintenance intends to bring the CDR link
up. If the Link Setup trial fails, CDR Link Maintenance waits 30 seconds before the
next retry. If the number of retries reaches the value of a threshold (two), a Minor
alarm is raised for service attention.
555-233-123
Alarm
Level Initial Command to Run
MINOR test cdr-link primary/secondary l
WARNING test cdr-link primary/secondary
Full Name
of MO
CDR Link
CDR Link
Issue 4 May 2002 10-1409