Busyout Tdm; Busyout Tone-Clock - Avaya Definity SI Maintenance Manual

busyout tdm

busyout tdm
Help Messages
If the system technician presses
message appears:
Error Messages
If the technician does not enter a port network number followed by bus, the
following message appears:
If the port network on which the desired TDM bus resides is unavailable, the
following message appears:
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:

busyout tone-clock

Help Messages
If the system technician presses
following message appears:
Enter tone/clock location: [cabinet(1-3];(carrier(A-E))
Error Messages
If an identifier greater than 3 (three) characters is entered, or the cabinet entered
is not a digit (number), the following message appears:
555-233-123
HELP
Enter TDM bus location: [network(1-3)];carrier(A-B)
Identifier invalid
EPN is not available
'login id':'command' has a command conflict
All maintenance resources busy; try again later
HELP
Identifier invalid
after entering "busyout tdm," the following
after entering "busyout tone-clock," the
Issue 4 May 2002 A-13