Busyout Trunk - Avaya Definity SI Maintenance Manual

Error Messages from Chapter 8: Maintenance
Commands
If the carrier entered is invalid, the following message appears:
If the cabinet entered is not within the valid range of cabinets or the cabinet is not
administered, the following message appears:
If there is no tone/clock board at the specified location, one of the following
messages appears:
If the specified cabinet carrier location is that of a switch node, the following
message appears:
Switch Node carrier specified; invalid command for SN carrier
If the cabinet carrier location entered is that of an EPN that is not available, the
following message appears:
If the tone/clock is active and the specified action is busyout, the following
message appears:
Illegal Command for active object; use 'set' to switch to standby
If the command entered is in conflict with another currently executing command,
then a message appears showing the login id of the conflicting user and the
conflicting command. The message is as follows:
If during the execution of a command a resource problem occurs that requires the
user to restart the command, then the following message appears:
Command resources busy; Press CANCEL to clear, and then resubmit
If all of the available maintenance resources are currently in use, then the
following message appears:

busyout trunk

Help Messages
If the system technician presses
message appears:
A-14 Issue 4 May 2002
Invalid carrier specified
Cabinet number not assigned
Board not inserted
Board not assigned
EPN is not available
'login id':'command' has a command conflict
All maintenance resources busy; try again later
HELP
Enter assigned trunk group number [or group/member]
after entering "busyout trunk," the following
555-233-123