Replenishment Of Boiler Water / Activating The Pump - Ascaso BIG DREAM User Manual

7.3 REPLENISHMENT OF BOILER WATER/ACTIVATION OF PUMP
REPLENISHMENT OF BOILER WATER
This option is used to replenish the water in the boiler, which is the water that has been
stagnant for the longest time.
This is always done whenever the machine is turned on.
You can programme the amount of water to be replenished and the frequency of this
operation.
The screen will show:
• Option of enabling or disabling
the process.
• Four levels of the amount of water
to be replenished. Press the
required level to set this figure.
• Time between replenishments.
You can change the time between
replenishments by pressing the
time figure and changing it in the
new screen that appears. Don't
forget that this process only
takes place when the machine is
switched on.
ACTIVATING THE STEAM BOILER FILLING PUMP
Option of enabling/disabling the pump to send water to the steam boiler. If there is
sufficient pressure in the mains network, you can disable the pump for filling the boiler.
If you use water tanks to supply the machine, this function should always be enabled.
ACTIVATION OF PUMP FOR HOT WATER
As in the previous case, you can enable or disable the pump to get hot water for
infusions.
30