Ascaso BIG DREAM User Manual page 26

To activate the group again, simply press any button of the deactivated group and it will
start heating up again until it reaches the pre-set service temperature.
SWITCHING OFF - STAND-BY, STEAM BOILER
In this section you have the option of activating the stand-by status and manually
turning off the operation of the steam boiler.
Once stand-by has been activated, you can set the temperature at which you want it to
be maintained.
It is important to know that
this function will only be ex-
ecuted if all the groups in the
machine are on stand-by. In
other words, when the last
group in operation changes
to stand-by mode, the steam
boiler will also automatically
go into stand-by mode, re-
ducing the temperature to
the pre-set figure.
STAND-BY TEMPERATURE OF GROUPS/CUP WARMER
On this screen you can set the
temperature at which you want
to maintain the groups and cup
warmer when the stand-by function
is enabled.
To do so, press the figure of the
group/s that you want to select and
in the new screen that emerges you
can set the required temperature.
Repeat the same operation for the
cup warmer.
26
!
To set the temperature, press the existing figure
and a new screen will appear on which to
change it.
When you activate a group again, the boiler will
automatically start heating up, coming out of its
stand-by mode.