Ascaso BIG DREAM User Manual page 20

Using the control pad:
To enter the programming phase, hold down the continuous distribution button for
3 seconds until the light starts flashing.
Then press the button of the dose you want to programme, starting the distribution
of the coffee.
When you have the required amount of coffee, press the same button again to end
the programme.
Repeat the same procedure for all the doses you want to programme.
PROGRAMMING THE PRE-INFUSION/TYPES
This machine has two types of pre-infusion: the standard one at 9 bar and what
we call the gentle one which uses practically no pressure, whereby the ground
coffee tablet is moistened evenly without pressure to avoid altering the organoleptic
properties of the coffee as well as the 'channelling' effect (rivulets created by the
initial pressure which channel the water and prevent the total extraction of the coffee
tamped in the filter holder).
20