Measurement Channels; Configuring Inputs; Configuring A Predefined Bosch Sensor With The 'Bosch Sensor Wizard - Bosch DDU 7 Manual

78 en | Analog and Frequency Inputs
–
–
–
–
–
10.2.1

Measurement channels

10.3

Configuring inputs

10.3.1

Configuring a predefined Bosch sensor with the 'Bosch Sensor Wizard'

1.
2.
3.
4.
5.
6.
04.02.2019 | V 02 |
DDU 7 uses A/D converter oversampling and digital filtering to recording rate
Digital filters eliminate 'out-of-band' noise
Cut-off frequency automatically adjusted to recording rate
Linear phase - no signal distortion
Latency compensation - no filter delay in recorded data
Click on 'Measurement Sources' in the Toolbox.
Expand the list of 'I/O Channels' by clicking on '+' in the DDU 7 Project Tree.
Drag the 'Bosch Sensor Wizard' from the Toolbox and drop it on the desired analog input
channel in the DDU 7 Project Tree. The 'Bosch Sensor Wizard' opens.
st
1 : Choose
the sensor's
category
nd
2 : Narrow your
choice by
choosing a type
rd
3 : Select the
exact type
Opens sensor's
datasheet
Click 'Finish' when done.
The 'Create channel' window opens.
Enter channel name and description.
Manual
Display Unit DDU 7
These calibration
values will be
used
Bosch Motorsport