Lap Timing; Time Based Retrigger Protection; Distance Based Retrigger Protection - Bosch DDU 7 Manual

132 en | Lap Trigger
14.3

Lap timing

There are different possibilities to adjust the lap trigger to the timing situation.
The detection time defines the minimum time the input signal changes its state. E.g. a low
active signal needs to be below the threshold for min. 15 ms to release the trigger.
Channels for display
To display lap times use the following channels:
Channel
Laptrigger_lapctr_dls
Laptrigger_laptime_dls
Laptrigger_laptime_best_dls
Laptrigger_laptimeold_dls
Laptrigger_laptimeseg_dls
Laptrigger_lapctr_dls
14.3.1

Time Based Retrigger Protection

Trigger is locked for 5 s after main trigger was received.
To deactivate time based retrigger protection, set 'Retrigger lock time' to 0 ms.
14.3.2

Distance Based Retrigger Protection

Trigger is locked until 80% of track distance has been covered (3,200 m).
04.02.2019 | V 02 |
5000ms
Main Trigger
Manual
Function
Number of completed laps
Running laptime
Laptime of best lap
Laptime of last lap completed
Segment time of last segment
Number of completed laps
Display Unit DDU 7
Bosch Motorsport