Power Supply - Bosch DDU 7 Manual

8 en | Power Supply
2

Power Supply

Please ensure that you have a good ground installation. That means:
–
–
–
–
The following notations for power signals are used:
–
–
–
Be careful to observe current limits of wires and connector pins!
04.02.2019 | V 02 |
A ground that has a solid, low resistance connection to the negative battery terminal
Connection should be free from dirt, grease, paint, anodizing, etc.
Use large diameter wire
More metal-to-metal contact is better!
KL 15 is a switched battery rail controlled by the IGN-switch
KL 30 is an unswitched battery positive rail (same as battery positive terminal)
KL 31 is an unswitched ground rail (same as battery negative terminal)
Manual
Display Unit DDU 7
Bosch Motorsport