Furuno FSV-25 Operator's Manual page 108

6. OTHERS MENU
Monitor Setting menu
The [Monitor Setting] menu sets the function of dual monitors. Click [Monitor Setting]
on the [Initial Setting] menu to show the [Monitor Setting] menu.
[2nd Monitor Setting]: Selects the display format for the sub monitor ([OFF], [Dual
Display], [Sub Display]).
Note: When the above setting is changed the default display arrangement is restored.
• [OFF]: Select if a single monitor is connected.
• [Dual Display]: Main and sub monitors show different pictures in the combination
display mode.
• [Sub Display]: Main and sub monitors show the same picture in the combination dis-
play mode.
Display
mode
H2
V1
V2
[Monitor Resolution]: Selects the monitor resolution, among [Auto], [SXGA], [UX-
GA], [WUXGA]. Reset the power to apply setting.The vertical size and display position
are changed. If necessary adjust the display.
Data Box menu
The [Data Box] menu sets the readout format for the marks on the display. Click [Data
Box] on the [Initial Setting] menu to show the [Box] menu. This menu is also shown on
the pop-up menu.
[Data Box]: Turns the numeric/graphic data display on/off.
6-8
Monitor Setting
2nd Monitor Setting
Monitor Resolution
Dual display
Main monitor Sub monitor
H1
H1
H V1/V2
Data Box
Data Box
Data Box Transp
Quit
: Dual Display
: Auto
Sub display
Main monitor
H2 H1/H2
V2 H/V1
H/V1/V2
Quit
: ON
: OFF
Sub monitor
H1/H2
H/V1
H/V1/V2