How To Replay Setting Information - Furuno FSV-25 Operator's Manual

7.7.2

How to replay setting information

You may want to replay setting information to set up the equipment according to target
fish or fishing ground.
1. Right click the numeric/graphic data display to show the pop-up menu.
2. Click [Record/Recall].
3. Click [Setting File].
4. Click [Load User Prog].
User Program to load list
Progress bar
5. Select a file to load from the destination list.
when list is clicked
9. Click the [Load] button.
The progress bar shows the loading progress. The [Setting File] menu appears
when the saving is completed.
10. Long press the MENU/ESC key to close all menus.
Load User Prog
File Location
Local Disc (D:)
FSV25_2011_10_10_18_24_01.ini
File Name
Select User Program
User Program to Load
P1
H1 H2 V
6.Click the setting number on the [User Program to load] list.
7.Click the setting number to load on the [User Program to
set] list.
8.Check the scan mode ([H1], [V2], [V]) to which to load user
program.
7. RECORD/RECALL OPERATION
Destination list
User Program to set
P1
User Program
to set list
Load Cancel
7-9