Furuno FSV-25 Operator's Manual page 67

[H-Scan Color1 (or 2 to 4) Setting]: Customizes colors. See the procedure on the
next page.
1. Operate the trackball to select color then push the left button to show the color bar.
H-Scan Color1 Setting
Default Cancel Apply
2. Select color from [COL] or [Custom colors].
3. Click [Quit].
4. Repeat steps 1 through 3 to set other colors.
5. Click the [Apply] button.
Note: To restore default color setting, select [Default] on the window then push the left
button.
Select with trackball.
Edit Colors12
COL
Custom colors
Define Custom Colors
OK Cancel
COL: Default colors
Custom colors: Color(s) created with Add Color.
2. HORIZONTAL MODE
Quit
2-37