Furuno FSV-25 Operator's Manual page 155

7
Others Initial Setting
(con't from (con't from
preceding preceding
page) page)
Shortcut Menu
TX Pulse Length-H1
TX Power-H1
Color-H1
Color Response-H1
Echo Average -H1
8
Target Lock, U: No/F: Yes
Tracking Method (Target Mark, Fish), U: Yes/F: Yes
Tilt Interlock (OFF, Tilt, Tilt&Range), U: No/F: No
Mark Interlock (OFF, Estimate Mark, Est&Fish Info),
U: No/F: No
Tracking Data (Horizontal, H&V), U: No/F: No
Threshold (1~30; 16), U: No/F: No
Bottom Threshold (0~5; 3), U: No/F: No
Target Speed Limit (1~15kn; 5kn), U: No/F: No
Smoothing (0.0~1.0; 0.5), U: No/F: No
Target SPD Update (15Sec, 30Sec, 45Sec, 60Sec), U: No/F: No
Target Lock Window (Small, Large, Largest), U: No/F: No
Dimension Setup (0~100t/1000m 2 ; 25t/1000m 2) ,
U: No/F: No
Volume Setup (0~100t/1000m 3 ; 25t/1000m 3),
U: Yes/F: No
Stabilization, U: No/F: Yes
Stabilization (OFF, ON), U: No/F: Yes
Pitch Angle Cor (-10.0~+10.0; 0.0), U: No/F: No
Roll Angle Cor (-10.0~+10.0; 0.0), U: No/F: No
Reg. TD Position (Execute), U: No/F: No
Test, U: No/F: Yes
Operation Test (Execute), U: No, F: No
Board Test (Execute), U: No, F: No
Panel Test (Execute), U: No, F: No
Test Pattern (Execute), U: No, F: No
RX Test (Execute), U: No, F: No
FAN MONITOR (Execute), U: No, F: No
TX (OFF, ON), U: Yes/F: Yes
Initialization, U: No/F: Yes
Save Ship's Org (Execute), U: No, F: No
Recall Ship's Org (Execute), U: No/F: No
Set To Default (Execute), U: No, F: No
Item Attribution (Non-Changeable, Changeable), U: No/F: No
Date&Time Setting, U: No, F: No
APPENDIX 1 MENU TREE
AP-5