How To Replay Setting Information - Furuno FSV-85 Operator's Manual

8. RECORD/RECALL OPERATION
8.5.2

How to replay setting information

You may want to replay setting information to set up the equipment according to target
fish or fishing ground.
1. Push the right-click button on the numeric/graphic data display to show the pop-
up menu.
2. Select [Record/Recall] then push the left-click button.
3. Select [Setting File] then push the left-click button.
4. Select [Load User Prog] then push the left-click button.
User Program to load list
Progress bar
5. Select a file to load from the destination list.
6. Select the setting number from the [User Program to load] list then push the left-
click button.
7. Select the setting number to load from the [User Program to set] list then push the
left-click button.
8. Select [Load] then push the left-click button.
The progress bar at the bottom of the box shows the loading progress. The [Set-
ting File] menu appears when the saving is completed.
9. Long-press the MENU/ESC key to close all menus.
8-6
Destination list
User Program to set list