Theben TR top2 Manual page 22

All programmed switching times are shown individually for each day. Should the switching occur on
several days at the same time, the complete weekday block and the respective weekday number
(Monday = 1, Tuesday = 2, etc.) flashes.
If no switching time has been programmed on a weekday this day is shown with the fade-in
-- : -- .
Submenu during the query:
If the OK push button is used during the query a submenu is activated:
NEXT  push button OK: The next switching time is shown.
PREVIOUS  push button OK: The last switching time to be shown is shown again.
CHANGE  push button OK: The switching time shown can be changed.
DELETE  push button OK: The switching time shown can be
deleted.
At END  push button OK: The switching time query is ended.
*It can always be selected with the NEXT, PREVIOUS, MODIFY and DELETE arrow buttons. Confirm
with OK.
MENU/PROGRAM/OK/CHANNEL/NEW/ ►/CHECK/ ►/MODIFY/OK
Example: Changing the switch-off time on Friday from 6:30 pm to 3:30 pm
With the push buttons ◄ and ► on the time bar it is possible to scroll through the saved switching times
up to the switch-off time on Friday:
On Friday the switch-off takes place at 6:30 pm (as on other weekdays as well).
Request the query submenu using the OK push button and scroll to the menu item
CHANGE with the ► push button.
Press OK push button to start the change. The time can now be changed.
................
Page | 22