Program Menu: Querying Switching Times - Theben TR top2 Manual

9.2 PROGRAM menu: Querying switching times

If it has to be verified whether the switching times have been correctly programmed all switching times
can be queried.
For example, if you wish to query the switching time for the previously programmed Friday:
With the MENU push button request the main menu from the auto mode.
Confirm the PROGRAM menu by pressing OK.
Press push button ►.
Press OK button.
Press OK button.
Now all programmed switching times are displayed classified on the time bar according to the time
sequence starting with the first weekday (e.g. Monday). If no switching times are saved EMPTY is faded
in.
In addition to the switching times in the devices TR 611 top2, TR 622 top2 and TR 611 top2 the
programmed pulses and the cycle programmes can also be queried separately. Moreover, using the
overall query ALL, all the switching times plus pulses plus cycle programs can be displayed.
Either confirm with the OK push button (if only the switching times are to be queried) or
continue to scroll with push buttons ◄ and ► until the desired query menu appears in the
display.
If the programmed pulse times, the cycle programmes or ALL are queried at the same time, press the
► push button as often as required until the corresponding display appears in the text line:
Push
Select the respectively required query and confirm with the OK push button.
If there is to be no further query, however a return to the auto mode, press push button ► again:
button ►
Push
button ► Push button ►
Page | 20