Options: Factory Settings - Theben TR top2 Manual

The push buttons ◄ and ► can be used to select the first digit of the PIN code and confirmed with the
OK push button.
After this, the second, third and fourth number of the PIN code is stipulated. As soon as the fourth
number has been confirmed with the OK push button a return is made to the auto mode.
Important: The PIN number is immediately valid and the time switch is locked by it.
Additional information: "Super PIN"

In each TR top2 time switch a super PIN code is stored individually for each device with which
the time switch can be unlocked in spite of a set PIN. This super PIN specific to each device
ensures that the time switch can be unlocked again if the PIN code has been forgotten.

The super PIN code is calculated from a special algorithm from the time switch device serial
number. This serial number, specific to each device, can be seen on the right-hand side of the
housing.

The super PIN with the special algorithm is available from Theben AG. If required please
contact the Theben hotline.

12.6 OPTIONS: FACTORY SETTINGS

This function resets the time switch to factory settings. Any settings made previously are overwritten.
The time switch is once again set in the delivery condition.
With the MENU push button request the main menu from the auto mode.
Press the ► push button three times and confirm the OPTIONS menu with the OK push
button.
Press push button ► until FACTORY SETTINGS appears on the display and confirm
with the OK push button.
Confirm LOAD FACTORY SETTINGS by pressing the OK push button.
The factory settings are loaded.
A return is now made to the delivery condition.
(see section 1 initial start-up).
Behaviour (time reset to the delivery condition):
Page | 56