Inactive (Delivery Status); Push Button - Functions - Theben TR top2 Manual

12.2.1 INACTIVE (delivery status)

o
The external input has no function.
o
If an external switch or push button is connected this can, if required, (e.g. open door
day) be set to INACTIVE by software, i.e. be deactivated without having to disconnect
the wire.
Confirm by pressing OK.
A return is now made to EXTERNAL INPUT.

12.2.2 PUSH BUTTON - Functions

Select the push button function:
o
MANUAL has the same function as manual switching via the time switch push buttons.
o
TIMER offers the option of loading the internal sequence timer (hourglass function) of
the time switch with a previously set sequence duration and to start the sequence
function by pressing the connected push button.




PUSH BUTTON - MANUAL Function
Confirm by pressing OK.
Confirm by pressing OK.
When confirming MANUAL with the OK push button a return is made to EXTERNAL INPUT. The
MANUAL mode (switching preselection) is set as the function for the connected push button.
The desired channel status (ON or OFF) and the timer sequence time in hours
and minutes must be entered.
If the push button is pressed the timer is started i.e. the channel is switched to
the stipulated ON or OFF status and the set time begins to elapse (e.g.
keystroke = ON for 5 minutes).
If the push button is pressed again whilst the timer time is elapsing the timer
channel status remains unchanged and the counter is started again with the full
sequence time.
The timer can be deleted by holding the push button for at least 3 seconds or
by selecting END TIMER in the MANUAL menu. This aborts the timer
function and the timer immediately returns to the normal switching program.
Page | 50