Display1: Production year (07), week (33), designation (TR) and
software version (01.23)
A return is made to INFO with the OK push button.
Displays 2, 3 and 4 are only visible by selecting push button ►:
Press push button ► in order to access display 2 (battery hours).
(in the example the time switch has run 6.3 hours on battery mode)
Press push button ► in order to access display 3 (mains hours).
(in the example the time switch has run 0.0 hours with the mains connection i.e. the time switch was
operated for less than 6 minutes with the mains voltage)
Press push button ► in order to access display 4 (date of the first mains connection).
(in the example the mains connection date 20.08.2007 is shown first. On this date the time switch was
operated for the first time)
With push button ► the user goes to END. With push button OK a return is made to the
auto mode.
12.8 Explanation of the priorities (from high to low):
Highest priority: External input: Release
Lowest priority: Switching times
When an ON switching time and an OFF switching time are programmed at the same time, OFF has
priority, i.e. there is no ON switching.
Manual switching priorities:
o
MANUAL is deleted by
External input: Permanent off
External input: Permanent on
Permanent switching
Holidays
Manual switching
Timer
Cycle
Pulse
Random
modification of the channel status with a program switching command
(switching time, pulse and cycle)
Page | 58