Maximum Temperature Setting - Mira COMBIFLOW User Manual

Maximum Temperature Setting

Read all the sections: Maximum temperature setting, Adjusting Maximum
Temperature Stop and Temperature Override Button Disable before carrying out
any of these procedures.
The following instructions are valid for both, Combiflow Exposed and Combiflow Built
in.
1.1 The Combiflow maximum temperature stop assembly is set to nominally 41 °C
at the factory (Note! This may vary according to the on-site water
temperatures).This equates to the two missing teeth of the white geared
maximum temperature stop ring being fitted in line with the raised part of the
plastic moulding on the red lever stop (as shown in the illustration). If the shower
has reversed inlets then approximately 41 °C equates to the two missing teeth
being fitted in line with the large locator on the red lever stop ring (as shown in the
illustration).
This End of Raised
Part of Moulding
Standard Inlet
Rear View of Maximum temperature Stop Assembly
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
White M•maximum
Temperature Stop
Missing Teeth
Red Lever Stop
Maximum Temperature
Stop Assembly
Reversed Inlet
36
Red Lever Stop
Large Locator
Missing Teeth