Mira COMBIFLOW User Manual page 31

5.6 Remove the building-in shroud and fix
the support brackets and valve in
position using the two M4 x 30 mm
screws (supplied).
5.7 Align the hot and cold supply and outlet
pipes with the valve but do not secure
the pipes.
5.8 To complete the installation, refer to
section: 'Installation, 3. Solid and
dry-lined walls' and follow instructions
3.11 to 3.23.
Note! For stud partition installations
alternative fixing may be required.
Alternatively the support brackets can
be removed and the two alternative
rear mounting holes in the body can
be used to fit to the wall cavity or to a
timber nogging.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
Alternative Rear Fixing
31
M4 x 30 mm Screws