Maximum Temperature Setting - Mira vigour Installation And User Manual

Maximum Temperature Setting

least 12 °C above the required temperature for correct operation of the thermostatic
power shower.
To reset the maximum outlet temperature follow the sequence below :
1. Tu r n t h e o u t e r f l o w c o n t r o l
anticlockwise
2. Turn the inner temperature control
anticlockwise to the maximum
temperature stop. Do not depress
the override button.
3.
4. If the maximum temperature requires
adjustment then remove the outer
flow control, lever the outer flow
control and the inner temperature
shower unit.
5. Remove the small label covering the
retaining screw on the temperature
hub. Unscrew the retaining screw and
remove the temperature hub.
Note! This will void the factory
setting.
Maximum
Flow Position
Maximum Temperature Position
Inner Temperature Control Knob
18
Outer Flow Control
Temperature
Hub
Temperature Hub
Retaining Screw