Mira COMBIFLOW User Manual page 20

Falling Supplies
2.18 Follow the installation instructions 2.1
to 2.7.
2.19 Use the quad key to remove the outlet
nipple.
2.20 Carefully lever the outlet cap from the
outlet blanking plug in the shower
control body.
2.21 Use the quad key to remove the outlet
blanking plug.
2.22 Fit the outlet nipple, complete with 'O'
seal into the hole previously blanked.
Tighten the outlet nipple with the quad
key.
2.23 Fit the outlet blanking plug, complete
with 'O' seal, into the outlet hole
between the two inlet nipples. Tighten
the outlet blanking plug with the quad
key.
2.24 Fit the outlet cap correctly. The
matching contours of the outlet cap
and shower control body must be
aligned.
2.25 Locate the Combiflow shower control
on to the wall.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
Outlet Cap
Outlet Nipple
Flat Face
20
Outlet Blanking Plug