Mira COMBIFLOW User Manual page 16

1.9 Thoroughly flush the hot and cold
water supply pipes. The supplies
must be clean and free from debris
before connecting the shower
control. Failure to do so may result
in product malfunction.
1.10 Slide the compression nuts and olives
over the supply pipes.
1.11 Locate the Combiflow shower control
on to the pipes and hold it in position.
Note! Make sure that the screws &
wall plugs supplied with the product
are used for mounting the shower.
1.12 Use a suitable screwdriver to tighten
the two screws through the body. The
screws will hold the shower control in
position.
1.13 Use a suitable
tighten the compression nuts
(anticlockwise rotation when viewed
from front). Protect the chrome plated
surfaces with a cloth.
1.14 Refer to Commissioning for details on
the flow regulator installation.
1.15 Turn on the water supplies and check
for any leaks.
1.16 Refer to Commissioning and Control
Assembly Fitting Instructions.
Shower Fittings
1.17 Install the shower fittings. Refer to the
Installation and User Guide for the
shower fittings.
For latest prices and delivery to your door visit MyTub Ltd 0845 303 8383 www.mytub.co.uk
spanner to
16
Olive
Compression
Nut
Screw