Error Messages - DURKOPP ADLER 911-210 Operating Instructions Manual

Troubleshooting

11.2.2 Error messages

Code
Sewing motor
1051
1052
1053
1055
1056
1058
1302
1342
1344
Stepper motors
2101
2102
2152
2153
2155
Operating Instructions 911-210 - 04.0 - 11/2016
Description
Sewing motor timeout
• Cable to sewing motor reference
switch defective
• Reference switch defective
• Machine head does not move freely
or has excessive belt tension
Sewing motor excess current
• Sewing motor cable defective
• Sewing motor defective
• Control defective
Sewing motor line voltage too high
Sewing motor overload
• Sewing motor blocked/not moving
freely
• Sewing motor defective
• Control defective
Sewing motor overtemperature
• Sewing motor not moving freely
• Sewing motor defective
• Control defective
Sewing motor speed
• Sewing motor defective
Sewing motor error
Control not receiving pulses from
pulse encoder in motor
Sewing motor error
Internal error
X-axis stepper motor referencing
timeout
• Faulty reference switch setting
• Faulty cable to the reference switch
• Reference switch defective
X-axis stepper motor current error
• Stepper motor blocked
• Encoder cable not connected or
defective
• Encoder defective
X-axis stepper motor excess current
X-axis stepper motor overvoltage
• Too high line voltage
X-axis stepper motor overload
• Feed system not moving freely
• Obstacle to feed motion
Troubleshooting
• Replace the cable
• Replace the reference switch
• Check the freedom of movement
and belt tension of the machine
head
• Replace the sewing motor cable
• Replace the sewing motor
• Replace the control
Check the line voltage
• Fix blockage/sluggishness
• Check the sewing motor
• Check the control
• Eliminate seizing
• Replace the sewing motor
• Replace the control
• Replace the sewing motor
• Check the cable from the pulse
encoder in the motor to the control
• Switch off and on the machine again
• Software update
• Align reference switch
• Replace the cable
• Check reference switch
• Fix blockage
• Check/replace the encoder cable
• Replace the stepper motor
• Replace the stepper motor
• Replace the control
• Check the line voltage
• Eliminate sluggishness
• Remove obstacles/adjust the motion
117