7. Confirm the selection with OK.
You are returned to the detail window with the modified contour.
8. Tap the Weiter (Next) button again.
A query dialog is displayed, asking if you wish to adopt the changes.
Important
Always perform a contour test after modifying a contour to ensure that the
new seam path lies within the permissible sewing field ( p. 54).
5.18.2 Changing the parameters of a seam program
You can also change the general settings that apply to the entire seam
program.
To change the parameters of a seam program:
1. Tap the menu items
The window for selecting the program parameter group appears:
Fig. 45: Changing the parameters of a seam program
2. Tap the desired parameter group.
The individual parameters of this group are displayed.
3. Tap the desired parameter.
The window for modifying the parameter value opens.
4. Set the parameter to the desired value ( p. 40).
62
Agreeing to this dialog will save the modified contour.
Bearbeiten (Edit)
(Seam program)
Parameters
>
.
Operating Instructions 911-210 - 04.0 - 11/2016
Programming
Nahtprogramm
>