Table of Contents
Advertisement
5.18 Editing an existing seam program
You can change the contour and parameters of existing seam programs.
The changes are applied to the seam program that is currently open on
the start screen.
To edit an existing seam program:
1. Open the program you wish to modify via the menu items
The program opens on the start screen.
5.18.1 Changing the contour of a seam program
To change the contour of a seam program:
1. Tap the menu items
The contour adjustment window appears:
Fig. 42: Changing the contour of a seam program (1)
(1) - Cursor
2. Use the arrow buttons to move the cursor (1) to the position on the
60
(File)
Öffnen (Open)
>
NOTICE
Property damage may occur!
If you have entered contour points that lie outside the sewing field,
the movement of the clamps during sewing can cause damage to the
machine or the sewing material.
Always perform a contour test after creating or editing a contour to
ensure that the entire contour lies within the permissible sewing field.
Bearbeiten (Edit)
(Seam program)
Contour)
.
①
contour that is to be changed.
.
>
Konturanpassing (Adjust
(2) - Scale: First to last stitch
Operating Instructions 911-210 - 04.0 - 11/2016
Programming
Datei
>
Nahtprogramm
②
Advertisement
Table of Contents
