Table of Contents
Advertisement
Maintenance
To lubricate the hook:
1. Turn the screw (2):
Important
The released amount of oil does not change until the operating time has
run a few minutes. Sew for several minutes before you check the setting
again.
7.3 Servicing the pneumatic system
7.3.1 Setting the operating pressure
Proper setting
Refer to the Technical data ( p. 121) chapter for the permissible
operating pressure. The operating pressure cannot deviate by more than
± 0.5 bar.
Check the operating pressure on a daily basis.
Fig. 63: Setting the operating pressure
(1) - Pressure controller
Operating Instructions 911-210 - 04.0 - 11/2016
• counterclockwise: more oil is released
• clockwise: less oil is released
NOTICE
Property damage from incorrect setting!
Incorrect operating pressure can result in damage to the machine.
Ensure that the machine is only used when the operating pressure
is set correctly.
①
(2) - Pressure gage
②
95
Advertisement
Table of Contents
