6.0 Configuration
QoS: Quality of Service
applied to networks where it is
desired to give particular data
traffic/protocol(s)
priority
other data traffic.
© CalAmp
6.1.4.6 Quality of Service
Quality of Service (QoS) may be applied to various data which enter
the Phantom II. This section describes configuring QoS for data
which enters via the Ethernet port.
is
over
Image 6-14: Network Configuration, Quality of Service Submenu
If Enabled, the defined protocols and ports will have the QoS
service applied to them.
To define particular ports, protocol, and priority to be assigned, see
the example of such a configuration exercise on the following page.
Phantom II
Quality of Service Status
Values
Disable
Disable
Enable
67