Master Configuration - Cal Amp Phantom II Operating Manual

2.0 Quick Start
P C's
V iew t he NE TW ORK
SETTINGS (TCP/IP Properties) to
determine an appropriate
Address, Subnet Mask,
Gateway for the Phantom II.
(For basic testing, the Gateway
value is not critical.)
If a connection is being made to a
network (LAN), check with the
Network Administrator
available static IP address(es) so
as not to potentially create an IP
address conflict.
© CalAmp

2.2.4 Master Configuration

IP
and
for an
Select [B] Network Configuration
Select [A] Local IP Config
Select [B] Enter IP Address
Select [C] Enter Subnet Mask
Select [D] Enter IP Gateway; Press [Enter]
Press [U] to SAVE the configuration changes
Press [Esc] twice to return to the MAIN MENU
Select [C] Radio Configuration
Select [B] Operation Mode
Select [A] Master
Select [I] Network Type
Select [B] Point-to-Point
Select [J] Destination Unit. Enter the number 20.
Press [Enter]
Press [U] to SAVE the configuration changes
Press [Esc] to return to the MAIN MENU
Press [Q] to Quit
Phantom II
17