6.0 Configuration
NTP may be used to synchronize
the time in the Phantom II within
a network to a reference time
source.
© CalAmp
6.1.4.2 NTP Server Configuration
The Network Time Protocol (NTP) feature may be ENABLED,
provided there is an NTP server available and its IP address or
'name' is entered in the appropriate field.
Image 6-10: Network Configuration, NTP Server Config. Submenu
Note that if NTP Server Status is ENABLED, the 'Synchronize with
NTP Server' soft button on the System Configuration menu will be
available for use.
Leave as DISABLED (default) if a server is not available.
Phantom II
NTP Server Status
Values
Disable
Disable
Enable
52