Reset Firewall To Factory Default - Cal Amp Phantom II Operating Manual

6.1 Configuration
© CalAmp
Enter the IP/Subnet or MAC address of the device to be blacklisted.
All data traffic associated with this address will be blocked.
6.1.8.6.6 Reset Firewall to Default
This menu provides a soft button which, when selected, will reset
the firewall settings to factory defaults

Restart Firewall Now

Submit
Write parameter values into Phantom II memory.

Reset
Restore 'currently' modified parameter values to those
which were previously written into Phantom II memory.
Phantom II
IP/Subnet or MAC Address
Values
192.168.1.5
valid IP address
Image 6-36: Reset Firewall to Default
Soft Buttons
128