Remote Configuration - Cal Amp Phantom II Operating Manual

Phantom II
2.0 Quick Start

2.2.5 Remote Configuration

Remove the Serial connection from the MASTER device
and connect it to the next Phantom II.
Press [Enter] to open the log in prompt
Enter default user name (admin). Press [Enter]
Enter default password (admin). Press [Enter]
Select [B] Network Configuration
Select [A] Local IP Config
Select [B] Enter IP Address
Select [C] Enter Subnet Mask
Select [D] Enter IP Gateway. Press [Enter]
Press [U] SAVE the configuration changes
Press [Esc] twice to return to the MAIN MENU
Select [C] Radio Configuration
Select [F] Unit Address. Enter number 20. Press [Enter]
Select [I] Network Type
Select [B] Point-to-Point
Press [U] to SAVE the configuration changes
Press [Esc] to return to the MAIN MENU
Press [Q] to Quit .
© CalAmp 18