Peer-To-Peer (P2P) - Cal Amp Phantom II Operating Manual

5.0 Network Topologies
A P2P network requires a Master
modem.
The data being transmitted from
one Remote to another in P2P
mode is transferred via the
Master.
© CalAmp

5.3 Peer-to-Peer (P2P)

P2P mode is used for communications between pairings of remote
modems.
e.g. Remote 20 can exchange data with (only) Remote 30,
Remote 21 can exchange data with (only) Remote 35, etc.
The Master will resend the data incoming to it from both Remotes to
both/all Remotes; one Remote's data has a Destination Unit being
the other Remote and vice versa.
Example 5.3.1
A device located at a pump station must communicate bi-
directionally with another device at a water tank. The MASTER
Phantom II must reside in an office at a separate location.
All Phantom II modems within a particular network must be config-
ured to have the same Network Type.
Phantom II
Image 5-7: P2P Example 5.3.1: Master
continued...
30