6.1 Configuration
© CalAmp
6.1.8.1 Admin Password Configuration
To keep a system secure, the Administrator Password (which is
prompted-for at the LogOn window) should be modified rather than
retaining the factory default value of 'admin'.
Image 6-25: Security Config., Admin Password Config. Submenu
Do not forget the admin password as, if lost, it cannot be recovered.
Submit
Write parameter values into Phantom II memory.
Reset
Restore 'currently' modified parameter values to those
which were previously written into Phantom II memory.
New Password/Repeat Password
Values
admin
character string
Phantom II
Soft Buttons
104