Ui (User Interface) Access Configuration - Cal Amp Phantom II Operating Manual

6.0 Configuration
Telnet: A user command which
uses the TCP/IP protocol to
access a remote device.
Format, from DOS prompt:
>telnet 192.168.1.50
where the IP addres s is that of
the target device.
If the above IP address is that of
a Phantom II accessible via the
network, the user will arrive at
the unit's LogOn window.
For a secure connection, see
'SSH' below.
HTTP: HyperText Transfer
Protocol. The standard protocol
for transferring data between a
Web server and a Web browser.
The Phantom II has a built-in
Web server.
SSH: Secure Shell. A protocol
used to create a secure
connection between two devices.
It provides authentication and
encryption.
Designed as a replacement for
Telnet, which is not secure.
© CalAmp

6.1.8.4 UI (User Interface) Access Configuration

User Interface (UI) Access Configuration. By default, all UI access
options are available, and include:
For security reasons, any or all may be disabled.
Image 6-28: Security Config. Menu, UI Access Config. Submenu
Phantom II

Telnet

HTTP

SSH

HTTPS
UI Access Configuration
Values
Enable
Enable
Disable
continued...
110