Network Discovery; Remote Sleep Control; Local Power Saving - Cal Amp Phantom II Operating Manual

Phantom II
6.0 Configuration

6.1.10.5 Network Discovery

This tool may be used to search the current network to find
additional Phantom II units and report the IP Address, Unit Address
and Description of each unit. The Refresh button will force the
Phantom II to search the network.
Image 6-49: System Tools, Network Discovery
6.1.10.6 Remote Sleep Control (Master)
Remote Sleep Control allows basic remote configuration of the
sleep properties of remote units. Any sleep configuration
parameters sent from a Master unit will overwrite any existing
sleep settings in the remote unit.
6.1.10.7 Local Power Saving (Master)
When the unit is configured as a Master in the Radio Configuration
menu, settings for Local Power Saving will be listed under the
System Tools Menu. The Local Power Saving Modes provide
power saving options for when the Master unit is not transmitting or
receiving data.
Power Saving Mode
Disable: Power Saving Mode is disabled by default.
Auto Wakeup: Unit will wakeup from activity on serial port,
Ethernet port or radio data, if the Radio Awak e Time is a nonzero
value. Power consumption is about 35-45 mA @ 12VDC.
continued...
© CalAmp 142