Enter An Airway In A Flight Plan - Garmin G1000 Reference Manual

Flight Planning
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airport
waypoints to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.

ENTER AN AIRWAY IN A FLIGHT PLAN

1) Press the FPL Key on the Control Unit.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
4) Turn the small FMS Knob one click clockwise and select the LD AIRWY
Softkey, or press the MENU Key and select "Load Airway"(required on
the PFD). The Select Airway Page is displayed. The LD AIRWY Softkey
or the "Load Airway" menu item is available only when an acceptable
airway entry waypoint has been chosen (the waypoint ahead of the cursor
position).
5) Turn the FMS Knob to select the desired airway from the list, and press the
ENT Key. Low altitude airways are shown first in the list, followed by "all"
altitude airways, and then high altitude airways.
6) Turn the FMS Knob to select the desired airway exit point from the list, and
press the ENT Key. 'LOAD?' is highlighted.
7) Press the ENT Key. The system returns to editing the flight plan with the
new airway inserted.
26
Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B