System Data Logging - Garmin G1000 Reference Manual

Delete a Saved Wi-Fi Network:
1) While viewing the list of saved networks, press the FMS Knob to activate
the cursor.
2) Turn either FMS Knob to highlight the network to be deleted.
3) Select the DELETE Softkey. The selected network is removed from the list.

SYSTEM DATA LOGGING

NOTE: An account must be established with Garmin Flight Data Services to
make full use of the System Data Logging feature.
The system selects the appropriate transmission method based on communication
network availability. Data transmission is manually when the airplane is on the
ground.
If report transmission is interrupted for some reason (e.g. networks unavailable,
hardware failure, loss of power), the system will attempt to resume sending the reports
at the next opportunity. The system ensures the complete data set is transmitted.
Transmitted reports remain in the system' s memory until they are overwritten by
newer data.
Control and monitoring of report transmissions is accomplished through the AUX-
REPORT STATUS Page.
View the Report Status Page
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select AUX-WI-FI SETUP or AUX-REPORT
STATUS Page.
3) If necessary, select the REPORT Softkey to display the AUX-REPORT STATUS
Page.
Changing Transmission Method
1) While viewing the Report Status Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to the 1st or 2nd transmit
method for the desired data report.
190-01344-00 Rev. B Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
Additional Features
81