Turn Vspeed Bugs On Or Off By Category; Set Barometric/Radar Altimeter Minimum Descent Altitude; Testing The Radar Altimeter; Displaying Wind Data - Garmin G1000 Reference Manual

5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or the TMR/REF Softkey.

TURN VSPEED BUGS ON OR OFF BY CATEGORY

1) Press the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight the desired option.
4) Press the ENT Key. Press the TMR/REF Softkey to remove the window.

SET BAROMETRIC/RADAR ALTIMETER MINIMUM DESCENT ALTITUDE

1)
Press the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the OFF/BARO/RAD ALT field to the
right of 'MINIMUMS'.
3) Turn the small FMS Knob clockwise to select BARO or RAD ALT.
4) Press the ENT Key.
5) Use the small FMS Knob to enter the desired altitude.
6) Press the ENT Key.
7) To remove the window, press the CLR Key or the TMR/REF Softkey.

TESTING THE RADAR ALTIMETER

1) Select the AUX-SYSTEM STATUS Page on the MFD.
2) Select the RA TEST Softkey. 'RA TEST' is displayed to the left of the Radar
Altitude window. The Radar Altitude window displays 50 feet, indicating a
properly functioning system.
3) Selecting the RA TEST Softkey again, or exiting the System Status Page
cancels the test.

DISPLAYING WIND DATA

1) Press the PFD Softkey.
2) Press the WIND Softkey to display wind data below the Selected Heading.
3) Press one of the OPTN softkeys to change how wind data is displayed.
4) To remove the Wind Data Window, press the OFF Softkey.
190-01344-00 Rev. B Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
Flight Instruments
3