Garmin G1000 Reference Manual page 131

MISCELLANEOUS MESSAGE ADVISORIES (CONT.)
Message
MAG VAR WARN – Large magnetic
variance. Verify all course angles.
SVS – SVS DISABLED: Out of
available terrain region.
SVS – SVS DISABLED: Terrain DB
resolution too low.
SCHEDULER [#] – <message>.
USER MAG VAR – User magnetic
variation is active.
REGISTER GFDS – Data services are
inoperative, register w/GFDS.
CHECK CRS – Database course for
LOC1 / [LOC ID] is [CRS]°.
CHECK CRS – Database course for
LOC2 / [LOC ID] is [CRS]°.
[PFD1, PFD2, or MFD1] CARD
1 REM – Card 1 was removed.
Reinsert card.
[PFD1, PFD2, or MFD1] CARD
2 REM – Card 2 was removed.
Reinsert card.
[PFD1, PFD2, or MFD1] CARD 1
ERR – Card 1 is invalid.
[PFD1, PFD2, or MFD1] CARD 2
ERR – Card 2 is invalid.
190-01344-00 Rev. B Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
Annunciations & Alerts
Comments
The GDU's internal model cannot determine
the exact magnetic variance for geographic
locations near the magnetic poles. Displayed
magnetic course angles may differ from the
actual magnetic heading by more than 2°.
Synthetic Vision is disabled because the aircraft
is not within the boundaries of the installed
terrain database.
Synthetic Vision is disabled because a terrain
database of sufficient resolution (9 arc-second
or better) is not currently installed.
Message criteria entered by the user.
User magnetic variation mode was selected
during previous operation and is still active
(checked at power-up.)
The system is not registered with Garmin Flight
Data Services, or it's current registration data
has failed authentication.
Selected course for LOC1 differs from published
localizer course by more than 10 degrees.
Selected course for LOC2 differs from published
localizer course by more than 10 degrees.
The SD card was removed from the top card
slot of the specified PFD or MFD. The SD card
needs to be reinserted.
The SD card was removed from the bottom
card slot of the specified PFD or MFD. The SD
card needs to be reinserted.
The SD card in the top card slot of the specified
PFD or MFD contains invalid data.
The SD card in the bottom card slot of the
specified PFD or MFD contains invalid data.
115