Enter An Airway In A Flight Plan - Garmin G1000 Cockpit Reference Manual

4) Turn the small FMS Knob. The Waypoint Information Window is now
displayed.
5) Enter the flight plan waypoint by one of the following:
a) Enter the user waypoint identifier, facility, or city.
b) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'NRST' airport
waypoints to the aircraft's current position.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'RECENT'
waypoints.
c) Turn the large FMS Knob to select the desired waypoint.
d) Press the ENT Key.
Or:
a) Turn the small FMS Knob to the left. Initially, a flight plan waypoint list
is displayed.
b) Turn the small FMS Knob to the right to display the 'USER' waypoints.
c) Turn the large FMS Knob to select the desired user waypoint.
d) Press the ENT Key.
6) Press the ENT Key again to "accept" the waypoint.

ENTER AN AIRWAY IN A FLIGHT PLAN

1) Press the FPL Key.
2) Press the FMS Knob to activate the cursor (not required on the PFD).
3) Turn the large FMS Knob to highlight the waypoint after the desired airway
entry point. If this waypoint is not a valid airway entry point, a valid entry
point should be entered at this time.
190-00963-02 Rev. C Garmin G1000 Cockpit Reference Guide for the Diamond DA42NG
Flight Planning
29