Garmin G1000 Reference Manual page 98

Additional Features
3) Turn the small FMS Knob to select the desired option (SAT SHORT BURST,
SAT RUDICS, WI-FI, or NONE). Sat Short Burst is generally used for
transmission of data packets less than 300 bytes. Wi-Fi is used only when
the aircraft on the ground.
4) Press the ENT Key.
Send All Unsent Data
1) While viewing the Report Status Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to the SEND button on the
desired data report.
3) Press the ENT Key. The Send Report window is displayed.
4) Turn the large FMS Knob to highlight the 'SELECT DATA TO SEND' field.
5) Turn the small FMS Knob to select 'ALL UNSENT DATA'.
6) Press the ENT Key.
Resend Data or Send Data Recorded in a Specific Time Frame
Transmission of data can only be performed while the aircraft is
NOTE:
on the ground.
1) While viewing the Report Status Page, press the FMS Knob to activate the
cursor.
2) Turn the large FMS Knob to move the cursor to the SEND button on the
desired data report.
3) Press the ENT Key. The Send Report window is displayed.
4) Turn the large FMS Knob to highlight the 'SELECT DATA TO SEND' field.
5) Turn the small FMS Knob to select 'DATA WITHIN TIME FRAME'.
6) Press the ENT Key. The time frame selection fields are now displayed.
7) Turn the large FMS Knob to select the starting time or date field.
8) Turn the small FMS Knob to select the desired starting time or date.
9) Press the ENT Key. The cursor will move to the next field.
10) When the last field is addressed, 'OK' will be highlighted. Press the ENT
Key to send the selected data.
82
Garmin G1000 Cockpit Reference Guide for the Beechcraft 300/B300 Series
190-01344-00 Rev. B