Table of Contents
Advertisement
T
HE TELEPHONE ANSWERING DEVICE
If you have purchased the model of fax equipped with a built-in
telephone answering device you can perform the same functions
as those performed by external telephone answering devices.
You can therefore:
•
record outgoing messages which will be played automatically
when you are out, to request callers to leave a message or call
back later;
•
record memos;
•
listen to outgoing messages;
•
change outgoing messages;
•
record messages left by callers when you are out, to ensure that
your calls do not get lost;
•
listen to recorded messages and memos;
•
delete recorded messages and memos;
•
forward messages to a remote telephone;
•
control the TAD from a remote location.
The TAD's recording capacity depends on the size of the memory
available (ca. 14 mins.). The length of the messages is
programmable and may be 30 or 60 seconds, see "Setting the length
of memos and incoming messages".
The TAD can only be enabled after recording outgoing message
1. See "Outgoing messages and memos", and, in particular,
"Recording outgoing message 1".
In TAD/FAX reception mode, the fax machine automatically prepares
to receive when it is called by another fax machine, to prevent
documents sent to you from getting lost.
In addition, to prevent others from operating the TAD from a remote
location without your authorization (except to leave messages),
access has been protected by a four-digit numeric code (set by default
to "1234") which you can change or delete at any time, see "Changing
or deleting the TAD access code".
T
HE TAD CONSOLE
This key starts playing new messages and memos. If there
are any messages or memos that you have not heard, the
procedure starts with the first unheard memo. In addition,
by pressing this key you can momentarily stop playing
messages and memos. By pressing the key again, you
resume listening.
28
(
)
TAD
This key starts recording a memo.
Press the key to move, while playing messages and memos,
to the start of the next message or memo.
Press this key to return to a previous message or memo
while playing messages and memos. You must first have
listened to all messages or memos.
By pressing the key again, you delete messages and memos
already listened to.
INDICATOR LED (MESSAGES)
On, to indicate that there are messages or memos in the
memory that have already been played.
Blinking, to indicate that there are messages or memos in
the memory that have not yet been played.
Off, to indicate that there are no messages or memos in the
memory.
Keys required to use the TAD:
This key provides access to the TAD configuration menu
and selection of various sub-menus.
/
By pressing this key you can select the available options for
a particular value or parameter.
This key starts recording and playing. In addition, it has the
following functions: selecting the menu for configuring the
TAD, sub-menu selection, parameter and setting
confirmation, and switching to the next condition.
This key interrupts recording and playing. It additionally
breaks off the current programming activity and returns the
fax machine to its stand-by status.
C
,
HANGING
DELETING AND ACTIVATING THE
ACCESS CODE
Use of an access code prevents
•
other people from listening to your personal messages;
•
and modifying the TAD configuration parameters that you
have set.
1. Press the key
until the display shows:
2. To confirm the entry, press the key:
3. Press the key
until the display shows:
Advertisement
Table of Contents
